T4360A1009 однополюсный (SPST) комнатный термостат с защитой от замерзания

Wall-mounted thermostat Resideo (Honeywell) T4360A1009 SPST with frost protection

T4360A1009 is a single-pole (SPST) wall thermostat for rooms with frost protection feature. It is designed to maintain the required temperature mode and automatically turn on heating when the temperature drops to minimize the risk of freezing of building structures, contents, and exposed pipelines.

The device can work in conjunction with L641B1004 (thermostat on the pipeline), forming a solution for pipeline frost protection: T4360A turns on heating when the temperature drops, while L641B turns off heating when the pipelines are warmed.

Key Features

• Type of thermostat: Room Thermostat (thermostat for rooms)
• Wiring scheme: SPST (Heating) - heating activation
• Operating mode: Heat (heating)
• Programmable functions: Frost Protection (frost protection)
• Temperature setting range: 0 … 20 °C (Set point Temperature Min/Max)
• Power supply voltage: up to 230 V AC ±10%
• Power/load current: 10(3) A
• Network frequency: 50 Hz…60 Hz (50/60 Hz)
• Protection class: IP30
• Electrical safety: Double Insulated (double insulation)

Suitable for which tasks

The T4360A1009 thermostat is designed for use in various types of heating and heat generation engineering systems. It is relevant for objects where it is important to prevent freezing when the temperature drops:

• Gas systems
• Oil solutions
• Electric heating
• Heat pumps
• Forced warm air supply
• Hot water
• Steam systems
• Gravity systems

Sensor and operating conditions

• Sensor type: Vapour Filled (capillary/vapour-filled sensor)
• Ambient temperature (min.): 0 °C
• Ambient temperature (max.): 40 °C
• Auto changeover modes: Auto Changeover - No
• ErP class: Not Applicable (not applicable)

Connection and installation

The device is designed for wired connection (Connection Type: Wire). For terminals, a wire size of up to 4 mm² (Terminal Wire Size: 4 mm²) is provided. Thermally designed for operation in rooms with a protection level of IP30.

• Connection type: Wire (wired)
• Conductor cross-section: 4 mm²
• Protection class: IP30
• Installation: wall-mounted (wall mounted)
• Application: temperature signal heating control

Dimensions

• Height: 3.56 in, 91 mm
• Width: 5.81 in, 147 mm
• Depth (Product Depth): 1.5 in, 38 mm

How to use together with other solutions

To build an effective pipeline frost protection system, the thermostat T4360A1009 can be used together with L641B1004:

• when temperature drops, T4360A initiates heating activation;
• when pipes are warmed, L641B ensures heating deactivation when the risk of freezing decreases.

Why choose Resideo (Honeywell) T4360A1009

• Focus on reliable protection: Frost Protection feature for critical temperatures.
• Clear control: SPST (Heating) - heating control based on threshold logic.
• Wide compatibility: suitable for different types of heat sources and systems.
• Compact for installation: wall-mounted design and support for 4 mm² wires.
• Operation in standard networks: support for 50/60 Hz, power supply up to 230 V AC.

Important: equipment Resideo (Honeywell) is recommended to be purchased from an official dealer LLC Promelectronics - sales@prom-elec.com, to ensure the correct offer for supply and accompanying information.

Also, we briefly inform: Resideo (Honeywell) equipment is still supplied in full volume to Russia.