Настенный термостат Resideo (Honeywell) для фанкойла T6375C1004 с линейным напряжением HVAC (230 В)

Купить Настенный термостат Resideo (Honeywell) для фанкойла T6375C1004 с линейным напряжением HVAC (230 В)

Wall-mounted thermostat Resideo (Honeywell) T6375C1004 for fan coil control in heating/cooling modes. Power supply 230 V, setpoint range 10–30 °C. Slider switches for modes and fan, double insulation. Ideal for offices and hotels.

T6376B1004
В наличии
0

Wall-mounted AC thermostat Resideo (Honeywell) for fan coils T6375C1004

Wall-mounted line voltage thermostat Resideo (Honeywell) T6375C1004 is designed for controlling fan-coil systems in heating/cooling mode. The model is designed for 230 V AC power and provides convenient manual control via switches - for use in offices, hotels, and other spaces where stability of regulation and clear management are important.

Key Benefits

  • Wall-mounted thermostat for controlling fan-coil units powered from the mains (line voltage).
  • Double membrane sensor for accurate maintenance of the set temperature under various loads and scenarios.
  • Minimalist design - neatly fits into the interior and is suitable for offices and hotels.
  • Available options with heat meter - for improved temperature control during heating and cooling.
  • Mounting of the thermostat directly on the wall or on a junction box.
  • Control panel with slider switches: mode selection and fan speed control.
  • For models T6374C and T6375C, sequential control is provided with a dead zone of 1.5 °C between the switching points of heating and cooling modes.

Modes and Logic of Operation

The device supports operation in Heat and Cool modes. Switching is done manually considering the dead zone, which reduces the likelihood of frequent switching and helps maintain a more comfortable temperature in the room.

Ease of Setup

  • Programming function: On/Off switch.
  • Switching “heating/cooling”: not applicable for this control logic.
  • Auto-switching: No - automatic changeover is not provided.

Temperature Setpoint Range

Operating temperature setting range: 10 … 30 °C. This allows flexible adjustment of the setpoint according to the requirements of a specific room and season.

Operating Climate Conditions

  • Relative humidity: 0% to 90% RH (maximum).

Electrical and Installation Characteristics

  • Type of thermostat: Fan coil (for fan coils).
  • Power supply: 230Vac (line voltage).
  • Grounding: double insulation (Double Insulated).
  • Cross-section of connected conductors: up to 1.5 mm² (Terminal Wire Size).
  • Fan function: not applicable (Not Applicable) within the specified specification.

Where it is Used

The thermostat T6375C1004 is ideal for controlling fan coils in commercial and public facilities: offices, hotels, meeting rooms, administrative premises. The minimalist interface and manual control logic make operation simple for the facility staff.

Why it is Important to Purchase Original Equipment Resideo (Honeywell) from an Official Dealer

Equipment Resideo (Honeywell) is recommended to be purchased from an official dealer - LLC "Promelektronika", e-mail: sales@prom-elec.com. This helps to receive correct support, deliveries, and completeness of the order.

It should also be noted that equipment Resideo (Honeywell) is still supplied in full volume to Russia, so purchases for facilities can be planned without losing availability of the assortment.

Briefly about the Model

  • Model: T6375C1004
  • Article: T6376B1004
  • Type: wall thermostat for fan coils
  • Power supply: 230Vac
  • Modes: Heat / Cool
  • Setpoint range: 10…30 °C
  • Humidity: 0…90% RH
  • Insulation: Double Insulated
  • Installation: on the wall or on the box
Бренд Resideo

Настенный термостат Resideo (Honeywell) для фанкойла T6375C1004 с линейным напряжением HVAC (230 В) отзывы

Оставьте отзыв об этом товаре первым!